Motorized my Malt Mill

Home Forums Club Forums Brewing Talk Motorized my Malt Mill

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Kyle Byerly Kyle Byerly 4 years, 6 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #295
    Profile photo of Dave Rosso
    Dave Rosso
    Participant

    Picked up a 1/4HP motor off of craigslist, a couple pulleys and belt from McMaster, and some wood from Home Depot. The white panels around the sides are this stuff called Diebond that I picked up from work (leftover from an old project).

    I added a light for easier viewing and plan to add a guard for the pulleys and eventually a port window so you can see straight down into the bucket you are filling.

    I’ll have it at Big Brew for anyone to use!

    IMG_20130428_171239

    IMG_20130428_171223

    IMG_20130428_171325

    #296
    Profile photo of Matt Smith
    Matt Smith
    Keymaster

    Very nice! I’m walking over to your house to mill my grains from now on. 😉

    #297
    Profile photo of Jason L Connor
    Jason L Connor
    Keymaster

    Damn man, super cool!

    #321
    Profile photo of Kyle Byerly
    Kyle Byerly
    Moderator

    Nice. Just need to make that door plexiglass, and maybe a bit of the ‘ceiling’ to see what’s going on…

    If only my system was a bit more portable I’d take advantage and brew a beer or 2 at big brew…

    Kyle

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.